[cisco-voip] Night Bell

[Jonathan Charles]

OK, let me try that


Jonathan

On Fri, Feb 15, 2008 at 3:09 PM, Craig Staffin <craig at staffin.org> wrote:
> Typically I see these interfaces being Trunk type so you would need an FXO
> port.
>
> I don't remember ever seeing one that was station to tell you the truth.
>
> Craig
>
>
>
> On Fri, Feb 15, 2008 at 3:07 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> > No, just a bell on a wall as far as I can tell... it has been painted
> > over a few hundred times...
> >
> >
> > Jonathan
> >
> >
> >
> >
> > On Fri, Feb 15, 2008 at 2:58 PM, Craig Staffin <craig at staffin.org> wrote:
> > > is it a night bell through a pageing system?
> > >
> > >
> > >
> > > On Fri, Feb 15, 2008 at 2:50 PM, Jonathan Charles <jonvoip at gmail.com>
> wrote:
> > > >
> > > >
> > > >
> > > > I am installing a new site and I have encountered my first Night Bell,
> > > > it is an old western electric thing that was plugged into their old
> > > > PBX
> > > >
> > > > As soon as I configure a DN on it in MGCP, it goes off hook and starts
> > > > ringing and the port is S_CONNECT...
> > > >
> > > > Same if I configure it H323
> > > >
> > > > It is connected to a VIC2-4FXS/DID set to POTS in MGCP
> > > >
> > > >
> > > > Any ideas?
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Jonathan
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > >
> > >
> > >
> > > --
> > > Craig Staffin
> > > Craig at staffin.org
> > > (H) 262-437-7313
> > > (C) 262-613-6003
> >
>
>
>
> --
>
> Craig Staffin
> Craig at staffin.org
> (H) 262-437-7313
> (C) 262-613-6003