[cisco-voip] Night Bell

[Paul Choi]

Have you tried an FXO card instead?

Paul

--- Jonathan Charles <jonvoip at gmail.com> wrote:

> No, just a bell on a wall as far as I can tell... it
> has been painted
> over a few hundred times...
> 
> 
> Jonathan
> 
> On Fri, Feb 15, 2008 at 2:58 PM, Craig Staffin
> <craig at staffin.org> wrote:
> > is it a night bell through a pageing system?
> >
> >
> >
> > On Fri, Feb 15, 2008 at 2:50 PM, Jonathan Charles
> <jonvoip at gmail.com> wrote:
> > >
> > >
> > >
> > > I am installing a new site and I have
> encountered my first Night Bell,
> > > it is an old western electric thing that was
> plugged into their old
> > > PBX
> > >
> > > As soon as I configure a DN on it in MGCP, it
> goes off hook and starts
> > > ringing and the port is S_CONNECT...
> > >
> > > Same if I configure it H323
> > >
> > > It is connected to a VIC2-4FXS/DID set to POTS
> in MGCP
> > >
> > >
> > > Any ideas?
> > >
> > >
> > >
> > >
> > >
> > > Jonathan
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
> >
> > --
> > Craig Staffin
> > Craig at staffin.org
> > (H) 262-437-7313
> > (C) 262-613-6003
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ