[cisco-voip] CCM 5.1.3, FXS/DID with MGCP

[Moataz Mamdouh]

the difference is the VIC2-4FXS/DID can provide DID feature on the single port , which means the single port with DID feature can route the incoming call from the PSTN to the destination number ( ip phone extension) , so u don't have to buy an E1 line for example to have the DID feature on it , you can just make it works on your analog VIC2-4FXS/DID . 
this is all the information i got regarding what you were asking for .

Jonathan Charles <jonvoip at gmail.com> wrote: So, I have 2801s and 2811s at remote sites, and I have a VIC2-4FXS/DID
card in the router, but that card only shows up on the 2801....

There is an option for a VIC-4FXS, is it the same thing?




Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080218/50e3e354/attachment.html