[cisco-voip] CCM 5.1.3, FXS/DID with MGCP

[Jonathan Charles]

I know what a FXS/DID is, I am curious why it isn't in the drop down
on CCM 5.1 for a 2811...



Jonathan

On Feb 18, 2008 11:41 PM, Moataz Mamdouh <moataz_mmdh at yahoo.com> wrote:
> the difference is the VIC2-4FXS/DID can provide DID feature on the single
> port , which means the single port with DID feature can route the incoming
> call from the PSTN to the destination number ( ip phone extension) , so u
> don't have to buy an E1 line for example to have the DID feature on it , you
> can just make it works on your analog VIC2-4FXS/DID .
> this is all the information i got regarding what you were asking for .
>
>
>
> Jonathan Charles <jonvoip at gmail.com> wrote:
>
>  So, I have 2801s and 2811s at remote sites, and I have a VIC2-4FXS/DID
> card in the router, but that card only shows up on the 2801....
>
> There is an option for a VIC-4FXS, is it the same thing?
>
>
>
>
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>  ________________________________
> Looking for last minute shopping deals? Find them fast with Yahoo! Search.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>