[cisco-voip] Direct Transfer to VM with CME & CUE

[Jimmy Pale]

Joe,

 

This example is the cleanest way I have found to do it without messing with
the E164 field in CUE. In this example 37.. represents the 4-digit
extensions and a translation-profile is applied to the dial-peer going to
the CUE.

 

ephone-dn  108

 number *37..

 description transfer direct to VM

 call-forward all 6000

 

voice translation-rule 6000

 rule 1 /^.*\(....\)/ /\1/

 

voice translation-profile vmdirect

 translate redirect-called 6000

 

dial-peer voice 90 voip

 description ** cue voicemail pilot number **  

 translation-profile outgoing vmdirect  

 destination-pattern 6000  

 session protocol sipv2  

 session target ipv4:10.75.100.2  

 dtmf-relay sip-notify  

 codec g711ulaw  

 no vad

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Pollere (US)
Sent: Tuesday, February 19, 2008 3:24 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Direct Transfer to VM with CME & CUE

 

Anyone have a config example for xfering directly to VM with CUE and CME.
Similar to *XXXX technique in Call Manager.

 

Thanks,

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080219/7cab5f53/attachment.html