[cisco-voip] Unity 5.x Installation Problems

[Pat Hayes]

You're referring to the Message Store Config Wizard? That's located on 
the server at \Commserver\ConfigurationSetup\Setup.exe. If you just 
re-run it though, you don't get to change much. To do that, I believe 
you have to first uninstall it from Add/Remove programs. Failing all of 
that, the Reconfiguration Guide explains how to change just about all of 
the things you set in that wizard.

-------- Original Message  --------
From: "Gregor Weißenfels" <gweissenfels at gmx.de>
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity 5.x Installation Problems
Date: 2/20/2008 11:24 AM

> Hello Team,
> 
> i am installing Cisco Unity 5.01 with Lotus Domino.
> In the "Cisco Unity Installation and Configuration Assistant" there are 7 steps to run through. I completed all 7 steps. I would like to start step 4 (Configure the Unity Message Store) manually, but it is not possible to start the previous steps of the installation again via the "Cisco Unity Installation and Configuration Assistant". 
> I have found every program on the CiscoUnity5.0.1-DVD1 to start it manually, except this one.
> 
> Does somebody have a hint, where i can find it? Or is there a possibility to outwit the Configuration Assistant, that he starts at the beginning?
> 
> Thank you very much!
> 
> Gregor
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip