[cisco-voip] Unity 5.x Installation Problems

[Jonathan Charles]

Regedit... set the steps to 0 and it will reprompt you for them... if
you poke around in HKLM/Software/Cisco/Unity or somewhere...



Jonathan

On Wed, Feb 20, 2008 at 10:24 AM, "Gregor Weißenfels"
<gweissenfels at gmx.de> wrote:
> Hello Team,
>
>  i am installing Cisco Unity 5.01 with Lotus Domino.
>  In the "Cisco Unity Installation and Configuration Assistant" there are 7 steps to run through. I completed all 7 steps. I would like to start step 4 (Configure the Unity Message Store) manually, but it is not possible to start the previous steps of the installation again via the "Cisco Unity Installation and Configuration Assistant".
>  I have found every program on the CiscoUnity5.0.1-DVD1 to start it manually, except this one.
>
>  Does somebody have a hint, where i can find it? Or is there a possibility to outwit the Configuration Assistant, that he starts at the beginning?
>
>  Thank you very much!
>
>  Gregor
>
>
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>