[cisco-voip] Freeing up DSPs

[Aman Chugh]

just to add to this what should happen in the following scenario, I have a
router with VWIC 1MFT1/E1 and PVD2-64 , I am going to use it for a E1 port
and want to use the remaining DSPS for conferencing, I will be configuring
the E1 first and then the conferencing, would the remaining DSPs available
for conferencing after I configure the E1 port.

Thanks,

Aman


On 2/21/08, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> OK... cool.
>
> Thanks
>
> Jonathan
>
> On Thu, Feb 21, 2008 at 10:39 AM, Voice Noob <voicenoob at gmail.com> wrote:
> > You can shutdown all 8 ports and then REBOOT the router. It allocates
> DSP's
> > for the FXO's on startup.
> >
> >
> >
> > On Thu, Feb 21, 2008 at 10:22 AM, Jonathan Charles <jonvoip at gmail.com>
> > wrote:
> >
> > >
> > >
> > >
> > > I have a router with 24 channels (a 16 and an 8) and 2 4-port FXO
> > > cards... we are enabling a PRI tomorrow...
> > >
> > > Can I just shut down the FXOs or do I need to pull the cards to free
> > > up the DSPs?
> > >
> > >
> > >
> > >
> > > Jonathan
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080221/9f0ad57d/attachment.html