[cisco-voip] Freeing up DSPs

[Jonathan Charles]

If the DSPs are not in use, then they are free for other uses... the
E1 should use 30 channels, leaving you 34 for Conferencing... in
theory...



Jonathan

On Thu, Feb 21, 2008 at 10:51 AM, Aman Chugh <aman.chugh at gmail.com> wrote:
> just to add to this what should happen in the following scenario, I have a
> router with VWIC 1MFT1/E1 and PVD2-64 , I am going to use it for a E1 port
> and want to use the remaining DSPS for conferencing, I will be configuring
> the E1 first and then the conferencing, would the remaining DSPs available
> for conferencing after I configure the E1 port.
>
> Thanks,
>
> Aman
>
>
>
>
> On 2/21/08, Jonathan Charles <jonvoip at gmail.com> wrote:
> > OK... cool.
> >
> > Thanks
> >
> > Jonathan
> >
> > On Thu, Feb 21, 2008 at 10:39 AM, Voice Noob <voicenoob at gmail.com> wrote:
> > > You can shutdown all 8 ports and then REBOOT the router. It allocates
> DSP's
> > > for the FXO's on startup.
> > >
> > >
> > >
> > > On Thu, Feb 21, 2008 at 10:22 AM, Jonathan Charles <jonvoip at gmail.com>
> > > wrote:
> > >
> > > >
> > > >
> > > >
> > > > I have a router with 24 channels (a 16 and an 8) and 2 4-port FXO
> > > > cards... we are enabling a PRI tomorrow...
> > > >
> > > > Can I just shut down the FXOs or do I need to pull the cards to free
> > > > up the DSPs?
> > > >
> > > >
> > > >
> > > >
> > > > Jonathan
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > >
> > >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>