[cisco-voip] Freeing up DSPs

[Aman Chugh]

Idealy that should happen  but I have seen that the T1, E1 sucks all the DSP
and  we need to remove the ds0 group and reboot the router to free up the
dsp.

Aman


On 2/21/08, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> If the DSPs are not in use, then they are free for other uses... the
> E1 should use 30 channels, leaving you 34 for Conferencing... in
> theory...
>
>
>
> Jonathan
>
> On Thu, Feb 21, 2008 at 10:51 AM, Aman Chugh <aman.chugh at gmail.com> wrote:
> > just to add to this what should happen in the following scenario, I have
> a
> > router with VWIC 1MFT1/E1 and PVD2-64 , I am going to use it for a E1
> port
> > and want to use the remaining DSPS for conferencing, I will be
> configuring
> > the E1 first and then the conferencing, would the remaining DSPs
> available
> > for conferencing after I configure the E1 port.
> >
> > Thanks,
> >
> > Aman
> >
> >
> >
> >
> > On 2/21/08, Jonathan Charles <jonvoip at gmail.com> wrote:
> > > OK... cool.
> > >
> > > Thanks
> > >
> > > Jonathan
> > >
> > > On Thu, Feb 21, 2008 at 10:39 AM, Voice Noob <voicenoob at gmail.com>
> wrote:
> > > > You can shutdown all 8 ports and then REBOOT the router. It
> allocates
> > DSP's
> > > > for the FXO's on startup.
> > > >
> > > >
> > > >
> > > > On Thu, Feb 21, 2008 at 10:22 AM, Jonathan Charles <
> jonvoip at gmail.com>
> > > > wrote:
> > > >
> > > > >
> > > > >
> > > > >
> > > > > I have a router with 24 channels (a 16 and an 8) and 2 4-port FXO
> > > > > cards... we are enabling a PRI tomorrow...
> > > > >
> > > > > Can I just shut down the FXOs or do I need to pull the cards to
> free
> > > > > up the DSPs?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Jonathan
> > > > > _______________________________________________
> > > > > cisco-voip mailing list
> > > > > cisco-voip at puck.nether.net
> > > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > > >
> > > >
> > > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080221/89bfc78f/attachment-0001.html