[cisco-voip] CCM 4.1.3 to CCM 6.0

[Jonathan Charles]

Yeah, I ran into them too, but I banged on it a bit and got around it...


Jonathan

On Fri, Feb 22, 2008 at 6:42 AM, Matthew Saskin <matt at saskin.net> wrote:
> Would advise going to 6.1, there are a handful of defects (all of which
>  I have hit multiple times...) which lead to some problems after
>  upgrading to 6.0, most relate to database problems having to do with the
>  IP VMS service.
>
>  -matt
>
>
>
>  Jonathan Charles wrote:
>  > Sure, it was easy, run DMA on old server, bring in DMA tarball during
>  > CCM 6 install...
>  >
>  >
>  > Jonathan
>  >
>  > On Thu, Feb 21, 2008 at 12:02 PM, Syed Khalid Ali
>  > <Khalid_Khursheed at hotmail.com> wrote:
>  >
>  >> Hi to all,
>  >>
>  >> I am using CCM 4.1.3 over VMWare. I need to know if  an upgrade path exits
>  >> from CCM 4.1.3 to CCM 6.0. Any one tried this upgrade path, please share you
>  >> experience.
>  >>
>  >> Need help!!!
>  >>
>  >> Regards,
>  >>
>  >> Syed Khalid Ali
>  >>
>  >> _______________________________________________
>  >>  cisco-voip mailing list
>  >>  cisco-voip at puck.nether.net
>  >>  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >>
>  >>
>  >>
>  > _______________________________________________
>  > cisco-voip mailing list
>  > cisco-voip at puck.nether.net
>  > https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>
>