[cisco-voip] Mixing MGCP and SCCP on a gateway
Kalle Tetto
tettokalle at hotmail.com
Sun Feb 24 09:55:06 EST 2008
Hi Jonathan,
I'm sorry, I have not one with FXS and PRI only with MGCP PRI and SCCP
Conferencing, but just configure MGCP as usual and then SCCP as usual.
They do not interfere each other. If it would not work you could not use
any hardware transcoding on the same box, because it always uses SCCP.
Hope this helps, if you have further questions, let me know!
MGCP Part
controller E1 0/0/0
pri-group timeslots 1-31 service mgcp
!
controller E1 0/0/1
pri-group timeslots 1-31 service mgcp
!
controller E1 0/1/0
pri-group timeslots 1-31 service mgcp
!
controller E1 0/1/1
pri-group timeslots 1-31 service mgcp
!
ccm-manager fallback-mgcp
ccm-manager redundant-host 172.31.1.1
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 172.31.1.1
ccm-manager config
!
mgcp
mgcp call-agent 172.31.1.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface Loopback1
mgcp bind media source-interface Loopback1
!
mgcp profile default
!
SCCP Part
sccp local GigabitEthernet0/0.1
sccp ccm 172.31.1.1 identifier 1 priority 4 version 4.0
sccp ccm 172.31.1.2 identifier 2 priority 3 version 4.0
sccp
!
sccp ccm group 1
associate ccm 2 priority 3
associate ccm 1 priority 4
associate profile 2 register CONF-PUK-FL-RO1
associate profile 1 register MTP-PUK-FL-ROU1
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec gsmfr
codec g729br8
associate application SCCP
shutdown
!
dspfarm profile 2 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 10
associate application SCCP
!
Jonathan Charles schrieb:
> Do you have a config example, FXS using SCCP and PRI using MGCP?
>
>
>
> Jonathan
>
> On Sat, Feb 23, 2008 at 3:16 AM, Kalle Tetto <tettokalle at hotmail.com> wrote:
>> Sure,
>>
>> no problem at all,
>>
>> you can even use mgcp, sccp and h323 on one gateway.
>>
>> Cheers
>>
>> Jonathan Charles schrieb:
>>
>>
>>> Just curious if this can even be done... Have a PRI and and FXS/DID
>> > card, want SCCP features on the FXS and MGCP for the PRI (could go
>> > with H323 for the PRI if need be...)
>> >
>> > Can this be done?
>> >
>> >
>> >
>> > Jonathan
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
More information about the cisco-voip
mailing list