[cisco-voip] Mixing MGCP and SCCP on a gateway

[Jonathan Charles]

OK, but how do you associate an FXS port with SCCP so I can get
advanced features (transfer, etc...) while the PRI is MGCP?



Jonathan

On Sun, Feb 24, 2008 at 8:55 AM, Kalle Tetto <tettokalle at hotmail.com> wrote:
> Hi Jonathan,
>
>  I'm sorry, I have not one with FXS and PRI only with MGCP PRI and SCCP
>  Conferencing, but just configure MGCP as usual and then SCCP as usual.
>  They do not interfere each other. If it would not work you could not use
>  any hardware transcoding on the same box, because it always uses SCCP.
>
>  Hope this helps, if you have further questions, let me know!
>
>  MGCP Part
>
>  controller E1 0/0/0
>   pri-group timeslots 1-31 service mgcp
>  !
>  controller E1 0/0/1
>   pri-group timeslots 1-31 service mgcp
>  !
>  controller E1 0/1/0
>   pri-group timeslots 1-31 service mgcp
>  !
>  controller E1 0/1/1
>   pri-group timeslots 1-31 service mgcp
>  !
>  ccm-manager fallback-mgcp
>  ccm-manager redundant-host 172.31.1.1
>  ccm-manager mgcp
>  ccm-manager music-on-hold
>  ccm-manager config server 172.31.1.1
>  ccm-manager config
>  !
>  mgcp
>  mgcp call-agent 172.31.1.2 2427 service-type mgcp version 0.1
>  mgcp dtmf-relay voip codec all mode out-of-band
>  mgcp rtp unreachable timeout 1000 action notify
>  mgcp modem passthrough voip mode nse
>  mgcp package-capability rtp-package
>  no mgcp package-capability res-package
>  mgcp package-capability sst-package
>  no mgcp package-capability fxr-package
>  mgcp package-capability pre-package
>  no mgcp timer receive-rtcp
>  mgcp sdp simple
>  mgcp rtp payload-type g726r16 static
>  mgcp bind control source-interface Loopback1
>  mgcp bind media source-interface Loopback1
>  !
>  mgcp profile default
>  !
>  SCCP Part
>
>  sccp local GigabitEthernet0/0.1
>  sccp ccm 172.31.1.1 identifier 1 priority 4 version 4.0
>  sccp ccm 172.31.1.2 identifier 2 priority 3 version 4.0
>  sccp
>  !
>  sccp ccm group 1
>   associate ccm 2 priority 3
>   associate ccm 1 priority 4
>   associate profile 2 register CONF-PUK-FL-RO1
>   associate profile 1 register MTP-PUK-FL-ROU1
>  !
>  dspfarm profile 1 transcode
>   codec g711ulaw
>   codec g711alaw
>   codec g729ar8
>   codec g729abr8
>   codec gsmfr
>   codec g729br8
>   associate application SCCP
>   shutdown
>  !
>  dspfarm profile 2 conference
>   codec g711ulaw
>   codec g711alaw
>   codec g729ar8
>   codec g729abr8
>   codec g729r8
>   codec g729br8
>   maximum sessions 10
>   associate application SCCP
>  !
>
>
>  Jonathan Charles schrieb:
>
>
> > Do you have a config example, FXS using SCCP and PRI using MGCP?
>  >
>  >
>  >
>  > Jonathan
>  >
>  > On Sat, Feb 23, 2008 at 3:16 AM, Kalle Tetto <tettokalle at hotmail.com> wrote:
>  >> Sure,
>  >>
>  >>  no problem at all,
>  >>
>  >>  you can even use mgcp, sccp and h323 on one gateway.
>  >>
>  >>  Cheers
>  >>
>  >>  Jonathan Charles schrieb:
>  >>
>  >>
>  >>> Just curious if this can even be done... Have a PRI and and FXS/DID
>  >>  > card, want SCCP features on the FXS and MGCP for the PRI (could go
>  >>  > with H323 for the PRI if need be...)
>  >>  >
>  >>  > Can this be done?
>  >>  >
>  >>  >
>  >>  >
>  >>  > Jonathan
>  >>
>  >>  _______________________________________________
>  >>  cisco-voip mailing list
>  >>  cisco-voip at puck.nether.net
>  >>  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >>
>
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>