[cisco-voip] Mixing MGCP and SCCP on a gateway

Paul Choi asobihoudai at yahoo.com
Sun Feb 24 12:55:43 EST 2008


Jonathan,

This is just a guess so don't take it as gospel but I
think you have to have stcapp running as well as sccp
and mgcp. You then have to have dial-peers that refer
to the FXS ports using application stcapp and
similarly have any dial-peers referring to the PRI
voice-port as application mgcpapp. Also for advanced
features on the FXS ports, I think you have to use the
"feature-codes" command.

Paul

--- Jonathan Charles <jonvoip at gmail.com> wrote:

> OK, but how do you associate an FXS port with SCCP
> so I can get
> advanced features (transfer, etc...) while the PRI
> is MGCP?
> 
> 
> 
> Jonathan
> 
> On Sun, Feb 24, 2008 at 8:55 AM, Kalle Tetto
> <tettokalle at hotmail.com> wrote:
> > Hi Jonathan,
> >
> >  I'm sorry, I have not one with FXS and PRI only
> with MGCP PRI and SCCP
> >  Conferencing, but just configure MGCP as usual
> and then SCCP as usual.
> >  They do not interfere each other. If it would not
> work you could not use
> >  any hardware transcoding on the same box, because
> it always uses SCCP.
> >
> >  Hope this helps, if you have further questions,
> let me know!
> >
> >  MGCP Part
> >
> >  controller E1 0/0/0
> >   pri-group timeslots 1-31 service mgcp
> >  !
> >  controller E1 0/0/1
> >   pri-group timeslots 1-31 service mgcp
> >  !
> >  controller E1 0/1/0
> >   pri-group timeslots 1-31 service mgcp
> >  !
> >  controller E1 0/1/1
> >   pri-group timeslots 1-31 service mgcp
> >  !
> >  ccm-manager fallback-mgcp
> >  ccm-manager redundant-host 172.31.1.1
> >  ccm-manager mgcp
> >  ccm-manager music-on-hold
> >  ccm-manager config server 172.31.1.1
> >  ccm-manager config
> >  !
> >  mgcp
> >  mgcp call-agent 172.31.1.2 2427 service-type mgcp
> version 0.1
> >  mgcp dtmf-relay voip codec all mode out-of-band
> >  mgcp rtp unreachable timeout 1000 action notify
> >  mgcp modem passthrough voip mode nse
> >  mgcp package-capability rtp-package
> >  no mgcp package-capability res-package
> >  mgcp package-capability sst-package
> >  no mgcp package-capability fxr-package
> >  mgcp package-capability pre-package
> >  no mgcp timer receive-rtcp
> >  mgcp sdp simple
> >  mgcp rtp payload-type g726r16 static
> >  mgcp bind control source-interface Loopback1
> >  mgcp bind media source-interface Loopback1
> >  !
> >  mgcp profile default
> >  !
> >  SCCP Part
> >
> >  sccp local GigabitEthernet0/0.1
> >  sccp ccm 172.31.1.1 identifier 1 priority 4
> version 4.0
> >  sccp ccm 172.31.1.2 identifier 2 priority 3
> version 4.0
> >  sccp
> >  !
> >  sccp ccm group 1
> >   associate ccm 2 priority 3
> >   associate ccm 1 priority 4
> >   associate profile 2 register CONF-PUK-FL-RO1
> >   associate profile 1 register MTP-PUK-FL-ROU1
> >  !
> >  dspfarm profile 1 transcode
> >   codec g711ulaw
> >   codec g711alaw
> >   codec g729ar8
> >   codec g729abr8
> >   codec gsmfr
> >   codec g729br8
> >   associate application SCCP
> >   shutdown
> >  !
> >  dspfarm profile 2 conference
> >   codec g711ulaw
> >   codec g711alaw
> >   codec g729ar8
> >   codec g729abr8
> >   codec g729r8
> >   codec g729br8
> >   maximum sessions 10
> >   associate application SCCP
> >  !
> >
> >
> >  Jonathan Charles schrieb:
> >
> >
> > > Do you have a config example, FXS using SCCP and
> PRI using MGCP?
> >  >
> >  >
> >  >
> >  > Jonathan
> >  >
> >  > On Sat, Feb 23, 2008 at 3:16 AM, Kalle Tetto
> <tettokalle at hotmail.com> wrote:
> >  >> Sure,
> >  >>
> >  >>  no problem at all,
> >  >>
> >  >>  you can even use mgcp, sccp and h323 on one
> gateway.
> >  >>
> >  >>  Cheers
> >  >>
> >  >>  Jonathan Charles schrieb:
> >  >>
> >  >>
> >  >>> Just curious if this can even be done... Have
> a PRI and and FXS/DID
> >  >>  > card, want SCCP features on the FXS and
> MGCP for the PRI (could go
> >  >>  > with H323 for the PRI if need be...)
> >  >>  >
> >  >>  > Can this be done?
> >  >>  >
> >  >>  >
> >  >>  >
> >  >>  > Jonathan
> >  >>
> >  >> 
> _______________________________________________
> >  >>  cisco-voip mailing list
> >  >>  cisco-voip at puck.nether.net
> >  >> 
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >  >>
> >
> >  _______________________________________________
> >  cisco-voip mailing list
> >  cisco-voip at puck.nether.net
> > 
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs


More information about the cisco-voip mailing list