[cisco-voip] G.722 Capability Advertisement

[Wes Sisk]

Yep, not there that I can see in 4.1.  This is very likely a bug, though 
none currently exists that I can find.  I recommend a new TAC case for 
proper investigation and defect if it becomes necessary.

/Wes

Matthew Melbourne wrote:
> After applying DevPack 65 to CCM 4.1(3)sr2, some newer devices have
> the capability to "Advertise G.722 Codec" (e.g. 7985s, 7945s). In the
> Device configuration, options are Disabled, Enabled or Use System
> Default.
>
> However, in CCM 4.1(3) I cannot find the "Advertise G.722 Codec"
> System Default as it's not on the Enterprise Parameters' page. I
> thought this may be an SR issue, so have 4.1(3)SR6a installed on a
> test system and the G.722 System Default isn't there either. I've
> checked in the CallManager Service Parameters too.
>
> Cheers,
>
> Matt
>
>