[cisco-voip] CCM5: PSTN Dialing

[Kalle Tetto]

Hi,

This will not work on pstn, try

Destination-pattern 9T that will work.

what you try to achieve is overlap sending on pstn with is normally only 
used where you have variable length dialplans.

Cheers

Ramiz Sardar schrieb:
> Friends,
> 
> I am working on voice setup where I am configuring gateways and CCM5. I 
> have both PBXs with analog phones and Call manager with IP Phones. Now 
> my fist phase is working fine scenario you can see below:
> 
> phone1---pbx1---router1------router2----pbx2---phone2
> 
> pbxs are connected with router with e1 pri and routers are connected 
> with each other via e1 link. Site1 code is 1000 and site2 code is 2000
> 
> site1 config ----
> dialpeer 2000 voip
> destinationpatern 2000
> session target router2 ip
> 
> site2 config ----
> dialpeer 2000 pots
> destination 2000
> port 1/0:15
> forward digit all
> 
> so user dial 2000 and extention of any length after site code, it worked 
> fine. Means in configuration I am not matching all digits so rest of 
> digits forward after dialpeer matches. This thing is very useful for 
> pstn dialing as I don't need the configure multiple dialpeer of 
> different lengths.
> Now Issue is that it is not working in the scenario in which I have CCM 
> and gateway.
> 
> IP Phone----CCM-----------Gateway----------PSTN
> 
> I configure destination pattern 9 on ccm that pointing to gateway. Then 
> I configured a dialpeer on Gateway that will forward call to pri with
> 
> pstn.
> Gateway config ---
> Dialpeer voice 9 pots
> Destination-pattern 9
> port 1/0:15
> forward digit all
> 
> But it is not working. As I press 9, I get silly tone. Please help me 
> get this issue resolved
> Waiting.....
> 
> Best Regards
> Rameez
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip