[cisco-voip] CCME 4.1.x destination-pattern

[Michael Wilson]

Hey,

Hope someone can help me.  I have a GSM Gateway attached to my 1760 router
via a VIC2-FXO.  The sim card which is installed in the GSM Gateway is an O2
Simplicity Sim (Unlimited calls to same Cellular Provider).  Now O2 operates
a multitude of dialing prefixes for their mobile phones and at present I
have cut down some of the work to reduce the long list down to their main
components.

Example - Previously where I would had destination-patterns for 07510, 07511
all the way to 07519 that has been replaced with - destination-pattern
0751[0-9]T

However, I have only managed to whittle the 86 dial prefixes down to 34
(with the new destination-pattern's)

What is the procedure for nesting if it can be done to further reduce the
destination-patterns.  Can there be multiple instances of [ ] ie

Based on the following 3 prefixes - 07858, 07860 & 07864

Could I do destination-pattern 078[5,6][0,4,8]T

If there are any better suggestions, by all means say.

Help appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080226/90f9779a/attachment.html