[cisco-voip] Cannot update 7941/61 phones after applying DevPack 65 to CCM 4.1(3)sr2

[Jonathan Charles]

Did you check that the DevPack was ok with SR2? You may need to go to
SR5 at least...



Jonathan

On Wed, Feb 27, 2008 at 5:54 PM, Matthew Melbourne
<matt at melbourne.org.uk> wrote:
> Hi,
>
>  After applying DevPack 65 to CCM 4.1(3)sr2, i am unable to modify (or
>  add) configurations of 7941/61 phones. After clicking on
>  Insert/Update, two CDP-related messages pop up and then a Callmanager
>  'Remote Scripting Error' appears.
>
>  The CDP-related errors are:
>
>  Cisco Discovery Protocol (CDP): Switch Port: Warning! CDP should only
>  be disabled on the Network port if this phone is connected to a
>  non-Cisco switch.
>
>  Cisco Discovery Protocol (CDP): PC Port: Warning! Disabling CDP on the
>  PC port will prevent Cisco VT Advantage/Unified Video Advantage from
>  working properly on this phone.
>
>  After these two errors are OKed, the CallManager Remote Scripting Error appears.
>
>  The 7941/61 base phone configuration page looks to have more
>  configurable items then previously (before applying the DevPack), so
>  it appears that CallManager cannot handle these new options. Is an
>  upgrade to a later SR a way forward, as the DevPack cannot be
>  uninstalled (its release notes suggest changing the device loads back,
>  but this would not change the base phone configuration pages)?
>
>  Cheers,
>
>  Matt
>
>  --
>  Matthew Melbourne
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>