[cisco-voip] dtmf not working with cme and mpx2

[James Grace]

we are trying to configure a mpx w/ cme. we dial the pilot number and
connect to mpx.  And then mpx will not take the prompts.  Something is wrong
with dtmf.  I configured dial peer

dial-peer voice 8050 voip
 description MeetingplaceX
 destination-pattern 8050
 session protocol sipv2
 session target ipv4:192.168.238.33
 dtmf-relay sip-notify
 codec g711ulaw
 no vad

Is there something im missing in CME

-- 
James Grace
CCVP CCNP CCNA MCSE MCDBA
System Engineer / Consultant
Email: grace.jd at gmail.com

MSN IM: grace.jd at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080229/47e6685b/attachment.html