[cisco-voip] H.323 LCR setup

[Louis Koekemoer (ZA)]

I need help at a client with their LCR routing. We've got a H.323
gateway setup on the CallManager pointing to the LCR supplier's server
ip address over the WAN. The LCR co can call my client over this trunk,
but when we are calling out, we just get an engaged tone. The way I
tested it was to create a route pattern to a cell number, and pointing
this pattern to the H.323 gateway directly. This way I eliminate any
issues with route lists and route groups. As I'm pointing to their
gateway directly, I have now way to debug from my side. They say they
are not getting anything from me. Their trunks are pointing to the
subscriber and publisher ip's. Can any of you guys send me in some
direction here?

 

Kind Regards

 

Louis Koekemoer 
Cisco IPT Systems Engineer

Dimension Data South Africa 

* +27 11 575 6560

*  +27 76 608 7221 

*louis.koekemoer at za.didata.com <mailto:louis.koekemoer at za.didata.com> 

 


This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080103/20880fee/attachment.html