[cisco-voip] H.323 LCR setup

[Matthew Saskin]

'debug voip ccapi inout' should let you see call flow among dial peers 
to verify that your call is actually leaving your gateway and heading 
towards them.

-matt

Louis Koekemoer (ZA) wrote:
> I need help at a client with their LCR routing. We’ve got a H.323 
> gateway setup on the CallManager pointing to the LCR supplier’s server 
> ip address over the WAN. The LCR co can call my client over this trunk, 
> but when we are calling out, we just get an engaged tone. The way I 
> tested it was to create a route pattern to a cell number, and pointing 
> this pattern to the H.323 gateway directly. This way I eliminate any 
> issues with route lists and route groups. As I’m pointing to their 
> gateway directly, I have now way to debug from my side. They say they 
> are not getting anything from me. Their trunks are pointing to the 
> subscriber and publisher ip’s. Can any of you guys send me in some 
> direction here?
> 
>  
> 
> **/Kind Regards/**
> 
>  
> 
> */Louis Koekemoer/*
> /Cisco IPT Systems Engineer/
> 
> /Dimension Data //South Africa/
> 
> (/ +27 11 575 6560/
> 
> )  +/27 76 608 7221/
> 
> */louis.koekemoer at za.didata.com <mailto:louis.koekemoer at za.didata.com>/
> 
>  
> 
> This email and all contents are subject to the following disclaimer:
> 
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip