[cisco-voip] Cisco Unity 4.0(3) integration with CUCM 6.0

[Matthew Saskin]

First step is to make sure the TSP version you have installed on Unity 
is compatible with CM6.

Once you've done that, you can either re-create the unity config in 
callmanager manually, or re-run the wizard.  From within Unity, CM6 
appears the same as CM4 (or any other version) via UTIM.

-matt

Anthony Kouloglou wrote:
> Hi,
> i have a working integration of a cisco unity 4.0(3) with a CCM 3.3(4).
> I rebuilt the installation to a CUCM 6.0 manually!!!
> Now, i want to integrate also the Cisco Unity. Is this possible?
> Unity says that it supports CCM 3.3 and higher.
> Do i need something more than creating the Voice Mail ports (which i 
> have already done) in the new appliance?
> For example, the voice mail ports in the 6.X do not have the same config 
> settings as in the old ccm.
> Do i need to run the wizard?
> 
> Any documentation will be appreciated.
> 
> Thanks
> Antonis
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip