[cisco-voip] Cisco Unity 4.0(3) integration with CUCM 6.0

[Anthony Kouloglou]

Hi Matt and thanks for the reply,
i would like to ask you one or two questions :
1. how can i check the TSP version on the Unity Server
2. In CCM 3.3(4) now, the voice mail ports forward the call if its busy 
to the next port but, in CUCM 6.x
the wizard asks you to configure line groups! Where do i need line 
groups and what is their connection to the unity integration?

Thanks a lot,
Antonis

Matthew Saskin wrote:
> First step is to make sure the TSP version you have installed on Unity 
> is compatible with CM6.
>
> Once you've done that, you can either re-create the unity config in 
> callmanager manually, or re-run the wizard.  From within Unity, CM6 
> appears the same as CM4 (or any other version) via UTIM.
>
> -matt
>
> Anthony Kouloglou wrote:
>> Hi,
>> i have a working integration of a cisco unity 4.0(3) with a CCM 3.3(4).
>> I rebuilt the installation to a CUCM 6.0 manually!!!
>> Now, i want to integrate also the Cisco Unity. Is this possible?
>> Unity says that it supports CCM 3.3 and higher.
>> Do i need something more than creating the Voice Mail ports (which i 
>> have already done) in the new appliance?
>> For example, the voice mail ports in the 6.X do not have the same 
>> config settings as in the old ccm.
>> Do i need to run the wizard?
>>
>> Any documentation will be appreciated.
>>
>> Thanks
>> Antonis
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>