[cisco-voip] callmanager usb etokens

[Patrick Diener]

that is exactly what is supposed to happen! ;-)

Did you start the CAPF service on the Pub?
Did you create the CTL file?
Did you install the LSCs (Local Significant Certificates) on the Phones?

=> read the "Cisco CallManager Security Guide, Release 4.2(1)"
carefully there are quite some steps involved to get Security up and
running...

Regards
Patrick



On 1/8/08, Aman Chugh <aman.chugh at gmail.com> wrote:
>
> I am configuring these with callmanager and when I change my cluster mode to
> mixed mode and change the device security mode to authenticated in
> enterprise parrametters my ipphones dont register, I am using 7960 and 7940
> . I have set the device security mode set to encrypted and cluster mode is
> set to 1. I have even tried changing the phone ethernet port to 2444 , but
> phones wont register. I re run the CTL client and change cluster mode to non
> secure and change the device modes to non secure and my phones resigter
> again.
>
> CM 4.2.1 SR1
>
> Any help would be appriciated.
>
>
> Aman
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>