[cisco-voip] callmanager usb etokens

[Aman Chugh]

1.Yes
2. I ran the CTL client and generated the CTL file and I can see the
CTL.TLVfile on the tftp server along with
cnf.xml.sgn files for my phones .
3. I am not sure about the LSC for phones, I did go through the guide for
CTL client installation, will dig deeper into the guide  for this .

Any other things which could cause the phones not to register when security
is enabled.

Aman


On 1/8/08, Patrick Diener <patrick.diener at gmail.com> wrote:
>
> that is exactly what is supposed to happen! ;-)
>
> Did you start the CAPF service on the Pub?
> Did you create the CTL file?
> Did you install the LSCs (Local Significant Certificates) on the Phones?
>
> => read the "Cisco CallManager Security Guide, Release 4.2(1)"
> carefully there are quite some steps involved to get Security up and
> running...
>
> Regards
> Patrick
>
>
>
> On 1/8/08, Aman Chugh <aman.chugh at gmail.com> wrote:
> >
> > I am configuring these with callmanager and when I change my cluster
> mode to
> > mixed mode and change the device security mode to authenticated in
> > enterprise parrametters my ipphones dont register, I am using 7960 and
> 7940
> > . I have set the device security mode set to encrypted and cluster mode
> is
> > set to 1. I have even tried changing the phone ethernet port to 2444 ,
> but
> > phones wont register. I re run the CTL client and change cluster mode to
> non
> > secure and change the device modes to non secure and my phones resigter
> > again.
> >
> > CM 4.2.1 SR1
> >
> > Any help would be appriciated.
> >
> >
> > Aman
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080109/7fc2f13b/attachment.html