[cisco-voip] install CCM4.1(3) on HP DL380G5 Server.

[Jacky Cai]

All, I found the problem and fixed it. nothing regarding firmware version.
The problem is the BBWC (Battery Backup Write Cache). When I add a BBWC to
the sever then all become OK.

Thank you for your great help.
Jacky Cai

2008/1/10, Jacky Cai <jackycxh at gmail.com>:
>
> Thanks all.
>
> I will try to obtain a ver 4.5a and try is again. will keep you updated.
>
> Thank you.
> Jacky Cai
>
> 2008/1/9, Andrius Kislas < Andrius-conf at elsis.lt>:
> >
> > Sorry I don't remember it, but it seems to me it might be it was 2.08 as
> > you told earner.
> >
> > Andrius
> >
> > Jacky Cai wrote:
> > > Thank you. I had tried it with 4.5, but I am not sure it is 4.5a. I
> > will
> > > confirm this. But do you remember what firmware version of the array
> > > controller you had?
> > >
> > > Best regards.
> > > Jacky Cai
> > >
> > > 2008/1/9, Andrius Kislas <Andrius-conf at elsis.lt
> > > <mailto: Andrius-conf at elsis.lt>>:
> > >
> > >     Hi,
> > >
> > >     I had an exact problem a couple weeks ago. It complained about
> > RAID and
> > >     BIOS. I didn't change anything but just hanged 2000.4.4 to
> > 2000.4.5a and
> > >     this way it installed successfully.
> > >
> > >     Andrius
> > >
> > >
> > >     Jacky Cai wrote:
> > >      > Hi All,
> > >      >
> > >      > I am working on setup a new Call Manager (Version 4.1.3) on a
> > HP
> > >     DL380G5
> > >      > Server. When Hardware detection during installation, It warning
> > >     that the
> > >      > array controller firmware version is not supported. the
> > expected
> > >     version
> > >      > is 1.18 but the new server is 2.08. and the installation
> > stopped. I
> > >      > found a v1.18 firmware from HP website and try to downgrade my
> > server
> > >      > for sometimes, but all attempts failed, the downgrading crash
> > the
> > >     array
> > >      > controller. the array controller model is Smart Array P400.
> > >      > Do any one has any idea about this? Is there any OS version for
> > >     CCM4.13
> > >      > can support P400 version 2.08 or later?  I had asked HP for an
> > >     old array
> > >      > controller with 1.18 but HP said 1.18 is too old and is end of
> > sales.
> > >      >
> > >      > Thank you.
> > >      > Jacky Cai
> > >      >
> > >      >
> > >      >
> > >
> > ------------------------------------------------------------------------
> > >      >
> > >      > _______________________________________________
> > >      > cisco-voip mailing list
> > >      > cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net >
> > >      > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080110/e42d54e8/attachment-0001.html