[cisco-voip] install CCM4.1(3) on HP DL380G5 Server.

[Lelio Fulgenzi]

Is this not part of the original server spec? Is it on the Cisco partnumbers list for 78[34]5h2 equiv?

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Life expectancy would grow by leaps and bounds if green vegetables smelled as good as bacon."
Doug Larson


  ----- Original Message ----- 
  From: Jacky Cai 
  To: Andrius Kislas ; cisco-voip at puck-nether.net List 
  Sent: Thursday, January 10, 2008 2:07 AM
  Subject: Re: [cisco-voip] install CCM4.1(3) on HP DL380G5 Server.


  All, I found the problem and fixed it. nothing regarding firmware version. The problem is the BBWC (Battery Backup Write Cache). When I add a BBWC to the sever then all become OK.

  Thank you for your great help.
  Jacky Cai 


  2008/1/10, Jacky Cai <jackycxh at gmail.com>:
    Thanks all.

    I will try to obtain a ver 4.5a and try is again. will keep you updated.

    Thank you.
    Jacky Cai


    2008/1/9, Andrius Kislas < Andrius-conf at elsis.lt>:
      Sorry I don't remember it, but it seems to me it might be it was 2.08 as
      you told earner.

      Andrius

      Jacky Cai wrote:
      > Thank you. I had tried it with 4.5, but I am not sure it is 4.5a. I will
      > confirm this. But do you remember what firmware version of the array 
      > controller you had?
      >
      > Best regards.
      > Jacky Cai
      >
      > 2008/1/9, Andrius Kislas < Andrius-conf at elsis.lt
      > <mailto: Andrius-conf at elsis.lt>>:
      >
      >     Hi,
      >
      >     I had an exact problem a couple weeks ago. It complained about RAID and
      >     BIOS. I didn't change anything but just hanged 2000.4.4 to 2000.4.5a and
      >     this way it installed successfully.
      >
      >     Andrius
      >
      >
      >     Jacky Cai wrote:
      >      > Hi All,
      >      >
      >      > I am working on setup a new Call Manager (Version 4.1.3) on a HP
      >     DL380G5
      >      > Server. When Hardware detection during installation, It warning
      >     that the
      >      > array controller firmware version is not supported. the expected 
      >     version
      >      > is 1.18 but the new server is 2.08. and the installation stopped. I
      >      > found a v1.18 firmware from HP website and try to downgrade my server
      >      > for sometimes, but all attempts failed, the downgrading crash the 
      >     array
      >      > controller. the array controller model is Smart Array P400.
      >      > Do any one has any idea about this? Is there any OS version for
      >     CCM4.13
      >      > can support P400 version 2.08 or later?  I had asked HP for an
      >     old array
      >      > controller with 1.18 but HP said 1.18 is too old and is end of sales.
      >      >
      >      > Thank you.
      >      > Jacky Cai 
      >      >
      >      >
      >      >
      >     ------------------------------------------------------------------------
      >      >
      >      > _______________________________________________ 
      >      > cisco-voip mailing list
      >      > cisco-voip at puck.nether.net <mailto: cisco-voip at puck.nether.net >
      >      > https://puck.nether.net/mailman/listinfo/cisco-voip
      >
      >








------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080110/7e900522/attachment.html