[cisco-voip] CMA 5.1 CHANGE TO WINDOWS

[Hesham Moussa]

Hi all,

 

Quick question, is it possible to change a CM 5.1 7835-H2-K9-CMA2
appliance to run Cisco's flavour of Windows to run IPCC Express 4.5(2)?
I have the following OS disks 7825-H1/H2/H3, 7835-H1/H2 OS 2000.4.5 and
7845-H1/H2 OS 2000.4.5?

 

Cheers,

 

H



**********************************************************************
Any opinions expressed in the e-mail are those of the individual and not necessarily the company. This e-mail and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this e-mail in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this e-mail in error, or if you are concerned with the content of this e-mail please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. Whilst the sender has taken every reasonable precaution to minimise this risk, we can not accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening this e-mail or any attachments to this e-mail. 

This e-mail was sent from Vanco UK Limited a company registered in England under number 2296733 and whose registered office is Units 1&2, Great West Plaza, Riverbank Way, Brentford, TW8 9RE, UK

Please consider the environment before printing this e-mail.
********************************************************************** 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080110/6e934651/attachment.html