[cisco-voip] install CCM4.1(3) on HP DL380G5 Server.

[Jacky Cai]

When I install CCM in the servers with firmware 1.18, the BBWC is not
needed. when the warning message displayed during installation, I can click
OK to continue. Now the firmware is v2.08, the BBWC must be installed. or
else the installation will stop when hardware detection. I had asked HP,
they said if there is not a BBWC, v2.08 would have some INT13 BIOS problem
and some OS might not be installed. then I try to install a BBWC and It
working now.

Thank you.
Jacky Cai

2008/1/10, Jonathan Charles <jonvoip at gmail.com>:
>
> I have seen this same message and it says OK or Cancel... if you hit
> OK it just installs...
>
> Generally it has happened when I am rebuilding a box and a later OS
> update has updated the firmware past the version installed by the
> original OS disks... you should be able to just bypass this and
> install...
>
> Another possibility is that you need to wipe out the array...
>
>
>
> Jonathan
>
> On Jan 8, 2008 8:38 PM, Jacky Cai <jackycxh at gmail.com> wrote:
> > Thanks, All.
> >
> > I had tried with 4.3, 4.4, 4.5. but all failed. I understand that  the
> > installation will update the firmware if the currently version is
> earlier
> > then expected. But if the currently version is newer then expected, it
> will
> > do nothing.
> > I had success installed into two other DL380G5 server in Apr 2007 with
> OS
> > version 4.4. I compared the new server with those two old server. the
> only
> > difference between them is the Array controller firmware version. So I
> think
> > the problem is this. Any advance else? Thank you.
> >
> > Jacky Cai
> >
> > 2008/1/9, Lelio Fulgenzi <lelio at uoguelph.ca>:
> >
> > >
> > >
> > > What OS version are you disks? From this chart:
> > >
> > >
> >
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/mcs-server-os-0711.xls
> > > For a fresh install, HP 380DL G5 only supports 2000.4.4, 2000.4.5
> > >
> > > Please confirm if this is what you have or not.
> > >
> > >
> > >
> >
> --------------------------------------------------------------------------------
> > > Lelio Fulgenzi, B.A.
> > > Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> > > (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > > "Life expectancy would grow by leaps and bounds if green vegetables
> > smelled as good as bacon."
> > > Doug Larson
> > >
> > >
> > > ----- Original Message -----
> > > From: Jacky Cai
> > > To: cisco-voip at puck.nether.net
> > > Sent: Tuesday, January 08, 2008 8:33 PM
> > > Subject: [cisco-voip] install CCM4.1(3) on HP DL380G5 Server.
> > >
> > >
> > >
> > > Hi All,
> > >
> > > I am working on setup a new Call Manager (Version 4.1.3) on a HP
> DL380G5
> > Server. When Hardware detection during installation, It warning that the
> > array controller firmware version is not supported. the expected version
> is
> > 1.18 but the new server is 2.08. and the installation stopped. I found a
> > v1.18 firmware from HP website and try to downgrade my server for
> sometimes,
> > but all attempts failed, the downgrading crash the array controller. the
> > array controller model is Smart Array P400.
> > > Do any one has any idea about this? Is there any OS version for
> CCM4.13
> > can support P400 version 2.08 or later?  I had asked HP for an old array
> > controller with 1.18 but HP said 1.18 is too old and is end of sales.
> > >
> > > Thank you.
> > > Jacky Cai
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080111/64a77024/attachment.html