[cisco-voip] Getting state message from mobile phones

[Jason Aarons (US)]

What is the actual isdn q931 message that goes along with the recording?
That would help you the most -jason

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert
Kulagowski
Sent: Monday, January 14, 2008 5:04 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Getting state message from mobile phones

I've got a site in Tokyo where the users are complaining that they're 
getting the generic "Your call could not be completed as dialed" from CM

when they try to call a cell phone which is turned off/out of range 
rather than getting an actual announcement from the telco stating why 
the call couldn't be completed.

Any ideas?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.