[cisco-voip] Any doc on the ccm6 internal sniffer?

[Wes Sisk]

Usually:
utils network capture eth0 file packets

Otherwise:
admin:help utils network capture

utils network capture eth0 help:

This command will capture IP packets on the ethernet interface

The packets can be displayed on the screen or saved to a file

Note: Line wrapping may occour

      When using page or file options, the complete capture of all requested

      packets must occour before the command will complete

Note: eth0 will be used as the default device

                                                                                                                              


Example:

admin:utils network capture count 5 numeric

Executing command with options:

 size=128                count=5                 interface=eth0

 src=                    dest=                   port=

                                                                                                                              


11:31:57.900286 philly.cisco.com.5901 > 
dhcp-128-107-142-57.cisco.com.3313: P 2869804405:2869805083(678) ack 
1220658143 win 6420 (DF)

11:31:57.900733 vv1-stern.cisco.com.38536 > dns-sj.cisco.com.domain:  
6113+[|domain] (DF)

11:31:57.902032 dns-sj.cisco.com.domain > vv1-stern.cisco.com.38536:  
6113*[|domain] (DF)

11:31:57.902172 vv1-stern.cisco.com.38536 > dns-sj.cisco.com.domain:  
60216+[|domain] (DF)

11:31:57.903282 dns-sj.cisco.com.domain > vv1-stern.cisco.com.38536:  
60216*[|domain] (DF)

/Wes

Jonathan Charles wrote:
> Never used it before, just curious...
>
>
>
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>