[cisco-voip] Carrier Authorization Code

[Joel Perez]

Here is a new one for me guys, hopefully you can help out.
As im sure some of you guys might remember I just recently installed a
RightFax solution for a customer.
All is going well with that up to now. I just received an email from the
customer that they are going to introduce "Carrier Access Codes" for all LD
calls.
Now, I know all about FAC's and CMC's and such and those are a breeze
usually.. But in this case once you dial an LD # the carrier prompts you for
an access code so you have to enter it manually.
In Right fax i can set up the same Access codes, but since my right fax
server has a PRI to my MGCP GW then it just passes all the digits and doesnt
give a chance for the carrier to prompt you for the Access Code. I have
tried to insert pauses but it isnt working.
Has anyone run into a similar situation?

Thanks,

Joel P
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080117/fccfa28c/attachment.html