[cisco-voip] Carrier Authorization Code

Joel P tman701 at gmail.com
Sat Jan 19 01:56:44 EST 2008


Thanks for the reply Kent.

So far I haven't gotten anywhere with this. According to RightFax they don't
have any provisions for inserting any DTMF tones after the digits have been
sent out the PRI. They suggested the same thing I was doing all along which
is to insert pauses when RightFax dials the #. But the CM still sees it all
as one group of #'s, so that is what is sent out, CM doesn't see the pause.

I will suggest going to the built in codes in CM and see if that is an
acceptable option for them.

Thanks,

Joel P

-----Original Message-----
From: Kent Roberts [mailto:kent at fredf.org] On Behalf Of Kent
Sent: Friday, January 18, 2008 11:46 PM
To: Joel Perez
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Carrier Authorization Code

I can tell you this does work.  We ran rightfax with ld codes via a 6608 
blade for several years.  We turned off the ld codes about a year ago, 
as they were just too much of a pain... So I can't even look at the 
config anymore to pass it along.

Also rememer that CCM4+ has ld codes  built in, not worth the expense to 
use a carrier now, but thats my .0000000002 cents

Joel Perez wrote:
> Here is a new one for me guys, hopefully you can help out.
> As im sure some of you guys might remember I just recently installed a 
> RightFax solution for a customer.
> All is going well with that up to now. I just received an email from 
> the customer that they are going to introduce "Carrier Access Codes" 
> for all LD calls.
> Now, I know all about FAC's and CMC's and such and those are a breeze 
> usually.. But in this case once you dial an LD # the carrier prompts 
> you for an access code so you have to enter it manually.
> In Right fax i can set up the same Access codes, but since my right 
> fax server has a PRI to my MGCP GW then it just passes all the digits 
> and doesnt give a chance for the carrier to prompt you for the Access 
> Code. I have tried to insert pauses but it isnt working.
> Has anyone run into a similar situation?
>  
> Thanks,
>  
> Joel P
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip




More information about the cisco-voip mailing list