[cisco-voip] Power over Ethernet

[TianLun Song]

Is CDP enabled by default?

On Jan 21, 2008 10:28 AM, Kevin Dunn <cheesevoice at gmail.com> wrote:

> excellent, I wil give that a try Kurt
>
>
>
>
> On 1/21/08, Kurt De Neef (Europe) <Kurt.DeNeef at eu.didata.com> wrote:
> >
> >  Hi Kevin,
> >
> >
> >
> > You need CDP to be enabled indeed in order to have the router be able to
> > recognize the phones and give power accordingly or not.
> >
> >
> >
> > Kurt
> >
> >
> >  ------------------------------
> >
> > *From:* cisco-voip-bounces at puck.nether.net [mailto:
> > cisco-voip-bounces at puck.nether.net] * On Behalf Of *Kevin Dunn
> > *Sent:* Monday, January 21, 2008 4:22 PM
> > *To:* Cisco Voice
> > * Subject:* [cisco-voip] Power over Ethernet
> >
> >
> >
> > Okay so this is a newbie question, but I can't seem to find the answer.
> >
> >
> >
> > I have an MGCP Gateway on a 2811
> >
> > this is a small 5 person office so they have an Ethernet module on the
> > router. (NM-16ESW) with a power card (PPWR-DCARD-16ESW).
> >
> >
> >
> > This weekend I tried to cut over the site and I can't get power to the
> > phones.
> >
> >
> >
> > the Config looks like this:
> >
> >
> >
> > Interface FastEthernet1/1
> >
> > decription Sue's Phone and PC
> >
> > switchport access Vlan 4
> >
> > switchport voice vlan 3
> >
> > duplex full
> >
> > speed 100
> >
> > power inline auto
> >
> > mls qos cos override
> >
> > spanning-tree portfast
> >
> >
> >
> > according to the router my options are power inline (auto, never).  Do I
> > need cdp enabled on the port to detect the phone?  How do I get power to the
> > phones?
> >
> >
> >
> > Much appreciated
> >
> >
> >
> > Kevin Dunn
> >
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
TianLun Song
CCVP, CCNP, M.Eng
Cell:1-416-829-3630
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080121/f447f7b1/attachment.html