[cisco-voip] CallManager trunks - removing prefix digits

[iptuser55]

You could remove the prefix completely from the parms and use translation Patterns to do the same work. Create a new partition only for the TP, then create a new TP with a calling prefix -I Think, to add the missing  0. You then create a new CSS with only the new partition in  for the inbound Gateways, this is used to route all calls to the new TP  you just created. Then assign a CSS to the TP which you use to normally route internal calls. Alternatively you could use this set up  delete the first 0 on the CCM trunk and then allow the parm in the second CM to add it again  
_________________________________________________________________
Telly addicts unite!
http://www.searchgamesbox.com/tvtown.shtml
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080122/22261a48/attachment.html