[cisco-voip] Cannot add phone in CUCME 4.2 through web gui

[Jack Martin]

You have to add the ephone from the command line before it will show up
in the web interface.

 

Example:

 

Ephone  6

mac-address 000C.5DDA.1234

 

Jack Martin, CCVP

Network Engineer

Tushaus Computer Services

10400 Innovation Drive, Ste 100

Milwaukee, WI 53226

414.908.2222 Helpdesk

414.908.2267 Work

414.908.4467 Fax

414.477.6990 Cell

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony
Kouloglou
Sent: Tuesday, January 22, 2008 11:10 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] Cannot add phone in CUCME 4.2 through web gui

 

Hi, i have a 2801 ISR running 124-11.XW2 and having the appropriate gui
files for CUCME 4.2(0).

I had auto assign enabled 1 to 5 and max ephones 9.
After i ran the wizard, 5 ephones were created but i assigned dn to only
3 of them.

Now, i want to add some more through the web gui but i can't!!
I always get "no new phone to add!"    and the ie annoying beep!!!
I have enabled auto-reg-ephone but yet nothing happens: i still can't
add a new phone.

Any ideas?

Thanks a  lot

Anthony

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080122/adc82e82/attachment.html