[cisco-voip] Unity default Call Handler...

[Joe Pollere (US)]

I think you have to expose the "error" call handler. You can do this in
the Advanced Settings under Tools Depot. Once exposed you should be able
to set an action on error.

Joe
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Tuesday, January 22, 2008 12:36 PM
To: Cisco VoIPoE List
Subject: [cisco-voip] Unity default Call Handler...

So, I have a bunch of sites with different call handlers...

If someone enters a bogus extension in the CH, it goes to the default
Opening Greeting... Is there a way to make it go back to the main
greeting for that site as  opposed to going to the default CH?



Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.