[cisco-voip] Calling Name truncated...

[Jonathan Charles]

Just out of curiosity, is there a reason for this? Does telco prefix
normal CNAME with some bogus character?



Jonathan

On Jan 22, 2008 12:00 PM, Wes Sisk <wsisk at cisco.com> wrote:
> and we will also strip the corresponding incoming character. /wes
>
>
> Jonathan Charles wrote:
> > The checkbox says, "Send Extra Leading Character in Display IE"
> >
> > so, it sounds like it would send the extra character (if we check the
> > box) which is currently getting stripped...
> >
> >
> >
> > Jonathan
> >
> > On Jan 22, 2008 11:27 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> >
> >> Just a note - the parameter is to strip the leading character if I recall
> >> correctly.
> >>
> >> If you are already seeing the first letter truncated and this parameter is
> >> NOT set, then I think you have a different problem.
> >>
> >> We enabled this parameter after we were seeing special ascii characters in
> >> the first character field, e.g. ƒLelio Fulgenzi.
> >>
> >> Interestingly enough, once we set this parameter and it fixed the problem,
> >> we started seeing a problem with calls from the TAC, where there first
> >> character was truncated as well. So I would get a call from "ohn Smith"
> >> instead of "John Smith".
> >>
> >>
> >>
> >>
> >> ----- Original Message -----
> >> From: "Jonathan Charles" <jonvoip at gmail.com>
> >> To: "Wes Sisk" <wsisk at cisco.com>
> >> Cc: "Cisco VoIPoE List" <cisco-voip at puck.nether.net>
> >> Sent: Tuesday, January 22, 2008 12:16 PM
> >> Subject: Re: [cisco-voip] Calling Name truncated...
> >>
> >>
> >>> OK, I will try it tonight...
> >>>
> >>>
> >>> Jonathan
> >>>
> >>> On Jan 22, 2008 10:35 AM, Wes Sisk <wsisk at cisco.com> wrote:
> >>>
> >>>>  On the gw config page in CCMAdmin select the "extra leading character"
> >>>> check box.
> >>>>
> >>>>  /Wes
> >>>>
> >>>>  Jonathan Charles wrote:
> >>>>
> >>>>  Also, I checked the gw and the Calling Name is coming thru complete,
> >>>> so it is getting lopped off between the GW and the phone...
> >>>>
> >>>>
> >>>>
> >>>> Jonathan
> >>>>
> >>>> On Jan 18, 2008 12:11 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> >>>>
> >>>>
> >>>>
> >>>>  Running CCM 6.01a, MGCP gateway with a DMS-100 switch, calling name on
> >>>> the phone is showing up with the first letter chopped off.
> >>>>
> >>>> Is there a fix for this?
> >>>>
> >>>>
> >>>>
> >>>> Jonathan
> >>>>
> >>>>
> >>>>  _______________________________________________
> >>>> cisco-voip mailing list
> >>>> cisco-voip at puck.nether.net
> >>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>
> >>>>
> >>>>
> >>> _______________________________________________
> >>> cisco-voip mailing list
> >>> cisco-voip at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>
> >>>
>