[cisco-voip] Calling Name truncated...

[Wes Sisk]

This is DMS specific.  Q.931 does not use it and I've not encountered 
another vendor who uses it.  It is simply a nuance of PRI interaction 
with DMS.

/Wes

Jonathan Charles wrote:
> Just out of curiosity, is there a reason for this? Does telco prefix
> normal CNAME with some bogus character?
>
>
>
> Jonathan
>
> On Jan 22, 2008 12:00 PM, Wes Sisk <wsisk at cisco.com> wrote:
>   
>> and we will also strip the corresponding incoming character. /wes
>>
>>
>> Jonathan Charles wrote:
>>     
>>> The checkbox says, "Send Extra Leading Character in Display IE"
>>>
>>> so, it sounds like it would send the extra character (if we check the
>>> box) which is currently getting stripped...
>>>
>>>
>>>
>>> Jonathan
>>>
>>> On Jan 22, 2008 11:27 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>>
>>>       
>>>> Just a note - the parameter is to strip the leading character if I recall
>>>> correctly.
>>>>
>>>> If you are already seeing the first letter truncated and this parameter is
>>>> NOT set, then I think you have a different problem.
>>>>
>>>> We enabled this parameter after we were seeing special ascii characters in
>>>> the first character field, e.g. ƒLelio Fulgenzi.
>>>>
>>>> Interestingly enough, once we set this parameter and it fixed the problem,
>>>> we started seeing a problem with calls from the TAC, where there first
>>>> character was truncated as well. So I would get a call from "ohn Smith"
>>>> instead of "John Smith".
>>>>
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>> From: "Jonathan Charles" <jonvoip at gmail.com>
>>>> To: "Wes Sisk" <wsisk at cisco.com>
>>>> Cc: "Cisco VoIPoE List" <cisco-voip at puck.nether.net>
>>>> Sent: Tuesday, January 22, 2008 12:16 PM
>>>> Subject: Re: [cisco-voip] Calling Name truncated...
>>>>
>>>>
>>>>         
>>>>> OK, I will try it tonight...
>>>>>
>>>>>
>>>>> Jonathan
>>>>>
>>>>> On Jan 22, 2008 10:35 AM, Wes Sisk <wsisk at cisco.com> wrote:
>>>>>
>>>>>           
>>>>>>  On the gw config page in CCMAdmin select the "extra leading character"
>>>>>> check box.
>>>>>>
>>>>>>  /Wes
>>>>>>
>>>>>>  Jonathan Charles wrote:
>>>>>>
>>>>>>  Also, I checked the gw and the Calling Name is coming thru complete,
>>>>>> so it is getting lopped off between the GW and the phone...
>>>>>>
>>>>>>
>>>>>>
>>>>>> Jonathan
>>>>>>
>>>>>> On Jan 18, 2008 12:11 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>  Running CCM 6.01a, MGCP gateway with a DMS-100 switch, calling name on
>>>>>> the phone is showing up with the first letter chopped off.
>>>>>>
>>>>>> Is there a fix for this?
>>>>>>
>>>>>>
>>>>>>
>>>>>> Jonathan
>>>>>>
>>>>>>
>>>>>>  _______________________________________________
>>>>>> cisco-voip mailing list
>>>>>> cisco-voip at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>
>>>>>>
>>>>>>
>>>>>>             
>>>>> _______________________________________________
>>>>> cisco-voip mailing list
>>>>> cisco-voip at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>
>>>>>
>>>>>