[cisco-voip] Calling Name truncated...

[Erick Bergquist]

Could it be it is DMS100 and not PRI NI2 switchtype? I thought Calling
Name was supported with MGCP and PRI NI2 and not really supported on
other switchtypes. Or do newer CCM versions also support name on other
then PRI NI2 with MGCP?

On Jan 22, 2008 12:39 PM, Wes Sisk <wsisk at cisco.com> wrote:
> This is DMS specific.  Q.931 does not use it and I've not encountered
> another vendor who uses it.  It is simply a nuance of PRI interaction
> with DMS.
>
> /Wes
>
>
> Jonathan Charles wrote:
> > Just out of curiosity, is there a reason for this? Does telco prefix
> > normal CNAME with some bogus character?
> >
> >
> >
> > Jonathan
> >
> > On Jan 22, 2008 12:00 PM, Wes Sisk <wsisk at cisco.com> wrote:
> >
> >> and we will also strip the corresponding incoming character. /wes
> >>
> >>
> >> Jonathan Charles wrote:
> >>
> >>> The checkbox says, "Send Extra Leading Character in Display IE"
> >>>
> >>> so, it sounds like it would send the extra character (if we check the
> >>> box) which is currently getting stripped...
> >>>
> >>>
> >>>
> >>> Jonathan
> >>>
> >>> On Jan 22, 2008 11:27 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> >>>
> >>>
> >>>> Just a note - the parameter is to strip the leading character if I recall
> >>>> correctly.
> >>>>
> >>>> If you are already seeing the first letter truncated and this parameter is
> >>>> NOT set, then I think you have a different problem.
> >>>>
> >>>> We enabled this parameter after we were seeing special ascii characters in
> >>>> the first character field, e.g. ƒLelio Fulgenzi.
> >>>>
> >>>> Interestingly enough, once we set this parameter and it fixed the problem,
> >>>> we started seeing a problem with calls from the TAC, where there first
> >>>> character was truncated as well. So I would get a call from "ohn Smith"
> >>>> instead of "John Smith".
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>> From: "Jonathan Charles" <jonvoip at gmail.com>
> >>>> To: "Wes Sisk" <wsisk at cisco.com>
> >>>> Cc: "Cisco VoIPoE List" <cisco-voip at puck.nether.net>
> >>>> Sent: Tuesday, January 22, 2008 12:16 PM
> >>>> Subject: Re: [cisco-voip] Calling Name truncated...
> >>>>
> >>>>
> >>>>
> >>>>> OK, I will try it tonight...
> >>>>>
> >>>>>
> >>>>> Jonathan
> >>>>>
> >>>>> On Jan 22, 2008 10:35 AM, Wes Sisk <wsisk at cisco.com> wrote:
> >>>>>
> >>>>>
> >>>>>>  On the gw config page in CCMAdmin select the "extra leading character"
> >>>>>> check box.
> >>>>>>
> >>>>>>  /Wes
> >>>>>>
> >>>>>>  Jonathan Charles wrote:
> >>>>>>
> >>>>>>  Also, I checked the gw and the Calling Name is coming thru complete,
> >>>>>> so it is getting lopped off between the GW and the phone...
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Jonathan
> >>>>>>
> >>>>>> On Jan 18, 2008 12:11 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>  Running CCM 6.01a, MGCP gateway with a DMS-100 switch, calling name on
> >>>>>> the phone is showing up with the first letter chopped off.
> >>>>>>
> >>>>>> Is there a fix for this?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Jonathan
> >>>>>>
> >>>>>>
> >>>>>>  _______________________________________________
> >>>>>> cisco-voip mailing list
> >>>>>> cisco-voip at puck.nether.net
> >>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>> _______________________________________________
> >>>>> cisco-voip mailing list
> >>>>> cisco-voip at puck.nether.net
> >>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
> >>>>>
> >>>>>
> >>>>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>