[cisco-voip] FW: Emergency call could not be routed using some route patterns (CERServer: CER)

[d4rk f1br]

I had that happen just the other day.  Apparently I had added some ERL's /
ELINS in CER but did not do the corresponding route pattern in CM.  If my
brain is right, for each one you have to do a translation pattern and route
pattern right?

At least that was my issue and it stated pretty much the same thing yours is
stating.



On Jan 25, 2008 4:58 PM, Voll, Scott <Scott.Voll at wesd.org> wrote:

> Anyone seen this before?
>
> Scott
>
> -----Original Message-----
> Subject: Emergency call could not be routed using some route patterns
> (CERServer: CER)
>
> Emergency call from  :5417575757  could not be routed using some Route
> Patterns.Check Event Log.
>
>
> Can't find anything in the event log
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080125/c7d629ad/attachment-0001.html