[cisco-voip] Can the BAT tool for CCM 3.3 export phone and user information?

[Jonathan Charles]

I have had no real problems with the CCM 3.3 to 6.0 upgrades...

Just build a new box with 3.3, restore your backup, upgrade to 4.1 and
then run DMA and install 6.1..

 No biggie...


Jonathan

On Jan 28, 2008 9:57 AM, Patrick Mowry <pmowry at getgds.com> wrote:
> Short version is I have to upgrade 3 3.3 clusters to one CCM 6.1
> cluster.  And since I can't use the DMA tool to combine them all, I was
> hoping I could export the user, phone and line information from each
> cluster and import them into a fresh build 6.1 system.  The largest
> cluster only has 650 phones.  The other two about 270 total.
>
> I'm hoping to avoid upgrading the larger publisher 3 times as well (
> 3.3(3) ->3.3(5) -> 4.2 ->6.1).  But I'm thinking I can't avoid this, and
> I'll have to upgrade each of the smaller systems to 4.2 so I can export
> them with the BAT tool.  Unless I can find some nice sql queries that
> can do the same thing.
>
>
> Thanks for reading through all that,
>
> -Patrick
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>