[cisco-voip] Video Conferencing ? CM 4.1(3)

[Matthew Saskin]

Ditto that for the Polycom's.  If I recall correctly, the polycom H.323 
load also has the ability for it to route outbound calls via the 
CallManager, so that a gatekeeper isn't necessary.

For the easiest integration with either vendor, just order the endpoint 
with the SCCP load on it.  From there, they have a plugin you run on the 
CallManager to load the new device type, then when you go to add a phone 
you'll have a new phone type of Tandberg Video Endpoint (for example).

-matt

Jeffrey Ollie wrote:
> On 1/29/08, d4rk f1br <d4rkf1ber at gmail.com> wrote:
>> Whats the basic way the units are setup to interoperate with CallManager?
>> Do they act like a voice endpoint and are setup like a phone?  Or are they
>> independent ?
> 
> Tandberg makes variants of a number of their units that talk SCCP and
> look/act like phones to CallManager.  Then to set up video conferences
> you just make phone calls.  The "normal" Tandberg units talk H.323 and
> SIP.  If you use H.323 you'll need a gatekeeper to connect them up to
> CallManager.  I haven't tried the SIP support yet.
> 
> Jeff
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip