[cisco-voip] Same Trunk on Both Side

[Ramiz Sardar]

Friends,

I am currently working on voip setup. My topology you can see below:

PhoneA----- PBX 1----------(2 PRI)-------Router1-----------Router2------(2
PRI)---PBX2---------PhoneB

As you can see that Routers are connect with PBXs through 2 E1 PRIs. I want
to make configuration so that if a call come from first pri (trunk) on
Router 1, on Router2 it most go on first pri  (trunk) that is connect to
PBX2 and same for second pri. Means If i recieve call from PBX1 on port
1/0:15 then i could tag it some how and and Router 2 recieve that call, it
send it you its port 1/0:15 and same for second port 1/1:15 on both side.
Tell me the way how can i do that.

Waiting for positive immediate response..

Best Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080131/20fc94e8/attachment.html