[cisco-voip] CallManager 4.31 Installation Help

[Ryan Ratliff]

Your email yesterday noted that you upgraded to 4Gb of RAM, which is good as
the DL380-G4 (7845-H1) requires 4Gb.

The full specs are at www.cisco.com/go/swonly (HP server solutions) under:
"HP DL380-G4 Server with Dual Xeon 3.4-GHz Processor".  There is one listing
for CM 4.1 and older and one for CM 4.3 and 5.

I believe someone not too long ago posted a similar issue and needed to
install some type of power module for the raid array.  Make sure you have
all of the parts listed in table 23 of the link above.

Both 2003.1.1 and 2003.1.2a should support this server.


-Ryan 
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Greg Ayoub
Sent: Thursday, January 31, 2008 12:18 PM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] CallManager 4.31 Installation Help

I am attempting to install CallManager OS 2003.1.1 onto a HP DL380 MCS-7845.

The hardware specs are as follows:

Dual Xeon 3.4Mhz CPU
2 Gb RAM
2 (72)Gb Hardrives
6i Raid controller v2.68A
BIOS firmware rev P-51 2006/04/26

The installation fails and I get the following message:

The configuration of the array controller failed!  This can be caused by
unexpected hardware or a hardware failure within the system.
Error code:2832

Is there something I am missing?? 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip