[cisco-voip] CME: Remove "9" from Phone Display for PSTN Calls

[Jonathan Charles]

well, secondary-dialtone 9 will get you your tone...

But when a dial-peer is matched, the sent digits should display on the
phone... at least this is what I have seen on CCM when it sends a call
to an H.323 gateway (however, CCM is probably removing the 9...)


Jonathan

On Mon, Jul 7, 2008 at 12:04 AM, Ramiz Sardar <ramizchaudhary at gmail.com> wrote:
> Hi,
>
> I configured CME so that when someone dial 9, he will recieve an other tone
> and then he can dial pstn number. Is there any way that when user dial 9, he
> recieve the same other tone but 9 digit not display on phones screen just
> following digits display (pstn number).
>
> Hoping for any solution
>
> Best Regards
> Rameez
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>