[cisco-voip] CME: Remove "9" from Phone Display for PSTN Calls

[Moataz Mamdouh]

well , you can acheive this by making a translation pattern that strips 9 then match a dial-peer of incoming called of .T.

--- On Mon, 7/7/08, Jonathan Charles <jonvoip at gmail.com> wrote:
From: Jonathan Charles <jonvoip at gmail.com>
Subject: Re: [cisco-voip] CME: Remove "9" from Phone Display for PSTN Calls
To: "Ramiz Sardar" <ramizchaudhary at gmail.com>
Cc: "cisco-voip" <cisco-voip at puck.nether.net>
Date: Monday, July 7, 2008, 1:18 AM

well, secondary-dialtone 9 will get you your tone...

But when a dial-peer is matched, the sent digits should display on the
phone... at least this is what I have seen on CCM when it sends a call
to an H.323 gateway (however, CCM is probably removing the 9...)


Jonathan

On Mon, Jul 7, 2008 at 12:04 AM, Ramiz Sardar <ramizchaudhary at gmail.com>
wrote:
> Hi,
>
> I configured CME so that when someone dial 9, he will recieve an other
tone
> and then he can dial pstn number. Is there any way that when user dial 9,
he
> recieve the same other tone but 9 digit not display on phones screen just
> following digits display (pstn number).
>
> Hoping for any solution
>
> Best Regards
> Rameez
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080707/aafeb37e/attachment.html>