[cisco-voip] Phone is dialing out by itself

[Micah Bennett]

Yes, so far this has only been reported for one specific agent.

 

I have reinstalled the CAD software on her PC and that had no effect. 

Micah Bennett 



  _____  

From: James Buchanan [mailto:jbuchanan at ctiusa.com] 
Sent: Monday, July 07, 2008 9:04 AM
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Phone is dialing out by itself

 

Hello,

 

Is this one specific agent?

 

Thanks,

 

James

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Monday, July 07, 2008 8:54 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Phone is dialing out by itself

 

Hello group.  I am about to open a TAC case but wanted to see if anyone
has heard of this before.  

CCM 4.2.3 - CRS 4.05SR2

Call Center agent (using CAD and IP phone 7940) takes an incoming call
in our primarily inbound contact center.  Agent handles the call and is
in not ready state at the end to finish the call logs and update the
customer record.  While working, the agent phone automatically dials out
to a vendor.  This may or may not be the last person they talked to.
Agent has done nothing to initiate the call.  They are just working and
then suddenly hear the dial tone and DTMF tones on their headset.  We do
not have any type of automatic out dial system.  

I may try replacing the phone and see if the problem is the phone or the
software. 

Micah Bennett

Telecommunications Admin

Automated License Systems

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080707/d5928d6f/attachment.html>