[cisco-voip] Anything special to enable CUE scripts in SRST mode?

[Ryan West]

Should be all you need, we normally keep the script pilots in a range and reference the range of '600.'

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, July 08, 2008 4:44 PM
To: Cisco Voyp List
Subject: [cisco-voip] Anything special to enable CUE scripts in SRST mode?

Just wondering if the list has any pointers on enabling CUE scripts in SRST mode. We made some changes in order for this to work but are now adding some additional scripts and triggers but I wasn't sure if the change we made was a global CUE config mode or not.

We will enable the voip dial-peer for each new script. Is that it?

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080708/1bb80417/attachment.html>