[cisco-voip] Multiple SIP Registrations

[Matt Slaga (US)]

Currently only supports a single ua.  If you need more than one trunk,
you need to get a wholesale sip provider.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Saturday, July 19, 2008 5:50 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multiple SIP Registrations

 

Does 12.4 IOS support multiple SIP registrations in sip-ua or does it
only support registering a single number to an ITSP?   A very simple
example would be a 2-port FXS VIC with two stations connected.  Each has
a unique phone number and both are required to register to an ITSP where
each number has different SIP authentication credentials.  Also, is
there a way to tell IOS to always use UDP 5060 as the source port?

 

Thanks,

Mark

 

 

 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080721/a16005c7/attachment.html>